Once you have a web site or perhaps an web app, rate of operation is very important. The speedier your web site performs and then the swifter your web apps operate, the better for everyone. Because a website is only an offering of data files that interact with one another, the devices that store and work with these data files have a crucial role in web site functionality.

Hard disk drives, or HDDs, have been, until recent years, the most trustworthy products for keeping data. Then again, in recent years solid–state drives, or SSDs, are already gaining popularity. Check out our assessment chart to view whether HDDs or SSDs are more appropriate for you.

1. Access Time

Image

SSD drives offer a brand–new & imaginative approach to data safe–keeping based on the utilization of electronic interfaces instead of just about any moving components and rotating disks. This unique technology is noticeably faster, allowing for a 0.1 millisecond file accessibility time.

Image

HDD drives still utilize the very same fundamental data access concept that was originally developed in the 1950s. Although it has been considerably enhanced since that time, it’s slow compared to what SSDs are offering. HDD drives’ file access speed ranges in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Because of the same radical solution that permits for a lot faster access times, it’s also possible to benefit from far better I/O efficiency with SSD drives. They are able to carry out double the procedures throughout a specific time when compared with an HDD drive.

An SSD can deal with at the very least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance gradually increases the more you use the hard drive. Having said that, once it gets to a certain limitation, it can’t go faster. And because of the now–old concept, that I/O limitation is noticeably less than what you can have having an SSD.

HDD can only go so far as 400 IO’s per second.

3. Reliability

Image

The absence of moving elements and rotating disks inside SSD drives, as well as the recent advances in electric interface technology have ended in an extremely safer data file storage device, having a common failing rate of 0.5%.

Image

HDD drives use spinning disks for storing and browsing data – a technology since the 1950s. And with disks magnetically hanging in mid–air, spinning at 7200 rpm, the prospects of one thing failing are much bigger.

The standard rate of failing of HDD drives ranges among 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving components and need almost no chilling power. Additionally, they demand a small amount of electricity to perform – lab tests have demostrated they can be powered by a standard AA battery.

As a whole, SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives can be infamous for being noisy; they’re more likely to overheating and when there are several hard drives in one server, you’ll want one more cooling unit used only for them.

In general, HDDs take in in between 6 and 15 watts.

5. CPU Power

Image

The faster the data file access rate is, the swifter the file demands can be adressed. As a result the CPU won’t have to arrange assets waiting around for the SSD to answer back.

The regular I/O delay for SSD drives is merely 1%.

Image

If you use an HDD, you will need to spend extra time awaiting the results of one’s data query. Consequently the CPU will be idle for additional time, waiting for the HDD to respond.

The normal I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

Almost all of Foxetech Hosting’s brand–new servers moved to simply SSD drives. Our personal tests have established that having an SSD, the typical service time for any I/O request although doing a backup continues to be under 20 ms.

Image

In comparison with SSD drives, HDDs feature considerably slower service times for I/O queries. Throughout a server backup, the common service time for any I/O request varies between 400 and 500 ms.

7. Backup Rates

Image

Referring to back ups and SSDs – we have found a fantastic development in the backup speed as we moved to SSDs. Currently, a common server back–up will take simply 6 hours.

Image

On the other hand, with a hosting server with HDD drives, a similar back–up will take three to four times as long to complete. An entire back–up of an HDD–equipped hosting server often takes 20 to 24 hours.

If you want to promptly improve the overall performance of your respective web sites and never having to change any kind of code, an SSD–driven web hosting solution is really a great choice. Take a look at Foxetech Hosting’s Linux cloud packages packages plus our Linux VPS packages – our services highlight fast SSD drives and are offered at inexpensive price points.

  • Service guarantees

  •  
  • Subscribe now. There are no installation fees you’ll also find full root access to your server. 99.9% network availability is guaranteed.

  • Compare our prices

  •  
  • Effortlessly compare the quotas and features offered by all of our Virtual Private Servers. Discover exactly which VPS configuration will provide you with precisely what you want to handle your dynamic web presence comfortably.
  • Compare our hosting plans

  • Contact Us

  •  
  • Get in touch with us 24x7x365 by email or by utilizing the ultra–fast ticketing system. Our techs are ready to reply to any inquiries within 60 minutes.